DETROIT — The all-new 2019 Chevrolet Silverado 1500 will offer the most advanced gasoline V-8 engines in the brand’s history: updated versions of the proven 5.3L and 6.2L V-8s with Dynamic Fuel Management. This industry-first cylinder deactivation technology enables the engines to operate in 17 different cylinder patterns to optimize power delivery and efficiency.
“Chevrolet first introduced its Active Fuel Management cylinder deactivation system in 2005, and Dynamic Fuel Management is a natural progression of the technology,” said Jordan Lee, Small Block chief engineer. “Dynamic Fuel Management enables only the cylinders needed to deliver the power you want, seamlessly delivering the best balance of power and fuel economy.”
Compared to Active Fuel Management, which alternates between eight- and four-cylinder modes, DFM features 17 cylinder patterns. That greater authority mixes cylinder patterns constantly to optimize efficiency and power delivery at all speeds.
During an industry-standard test schedule, the 2019 Silverado 2WD with the 5.3L and DFM operated with fewer than eight active cylinders more than 60 percent of the time, 9 percent more than a comparably equipped 2018 model with AFM.
DFM is powered by a sophisticated controller that continuously monitors every movement of the accelerator pedal and runs a complex sequence of calculations to determine how many cylinders are required to meet the driver’s requested torque. It can make this determination 80 times per second.
An electromechanical system deactivates and reactivates all 16 of the engine’s hydraulic valve lifters, controlling valve actuation. The system uses solenoids to deliver oil pressure to control ports in the lifters, which activate and deactivate the lifters’ latching mechanisms. When a cylinder is deactivated, the two-piece lifters effectively collapse on themselves to prevent them from opening the valves. When the cylinder is reactivated, solenoids send an oil pressure signal to the control ports on the lifters and the latching mechanism restores normal function, allowing the valves to open and close.
“The increased variability of Dynamic Fuel Management means the engine will operate more often with a reduced number of cylinders, which saves fuel across the board,” said Lee. “Better yet, the transitions are transparent, and because the system is torque-based, you’ve always got that satisfying feeling of power on demand that comes from Chevy’s Gen V Small Block V-8 engines.”
The 5.3L V-8 with DFM is SAE-certified at 355 horsepower (265 kW) and 383 lb-ft of torque (519 Nm) and is matched with a Hydra-Matic eight-speed automatic transmission.
The 6.2Lwith DFM — the largest and most powerful gas V-8 in the segment — is SAE-certified at 420 horsepower (313 kW) and 460 lb-ft of torque (623 Nm) and is paired with a Hydra-Matic 10-speed automatic transmission.
Both transmissions feature enhancements designed to improve shift quality, as well as a new centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness, particularly during cylinder deactivation events.
The engines also feature driver-selectable stop/start technology that helps save fuel in stop-and-go traffic. The 5.3L version is standard in LTZ and High Country models and available on LT, RST and Trail Boss. The 6.2L is available in LTZ and High Country. Both engines will be built at General Motors’ Tonawanda Engine Plant in Buffalo, New York.
Active Fuel Management also is employed on the Silverado’s standard 4.3L V-6 and E-85-capable 5.3L V-8.
The 2019 Silverado goes on sale this fall. EPA fuel economy estimates and towing/payload capacities are not yet available will be announced closer to launch.
ABOUT CHEVROLET
Founded in 1911 in Detroit, Chevrolet is one of the world’s largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.
# # #
2019 CHEVROLET SILVERADO 5.3L WITH DYNAMIC FUEL MANAGEMENT SPECIFICATIONS
| Type: | 5.3L V-8 VVT DI with Dynamic Fuel Management |
| Bore & Stroke (in / mm): | 3.78 x 3.62 / 96 x 92 |
| Block Material: | Cast aluminum |
| Cylinder Head Material: | Cast aluminum |
| Compression Ratio: | 11.0:1 |
| Firing Order: | 1-8-7-2-6-5-4-3 |
| Valvetrain: | Overhead valve, two valves per cylinder, variable valve timing |
| Fuel Delivery: | Direct high-pressure fuel injection with Dynamic Fuel Management |
| Ignition System: | High-energy coil-on-plug |
| Horsepower (hp / kW @ rpm): |
355 / 265 @ 5600 rpm (SAE certified) |
| Torque (lb.-ft. / Nm @ rpm): | 383 / 519 @ 4100 rpm (SAE certified) |
| Manufacturing Location | Tonawanda Engine Plant, Buffalo, N.Y. |
2019 CHEVROLET SILVERADO 6.2L WITH DYNAMIC FUEL MANAGEMENT SPECIFICATIONS
| Type: | 6.2L V-8 VVT DI with Dynamic Fuel Management |
| Bore & Stroke (in / mm): | 4.06 x 3.62 / 103.25 x 92 |
| Block Material: | Cast aluminum |
| Cylinder Head Material: | Cast aluminum |
| Compression Ratio: | 11.5:1 |
| Firing Order: | 1-8-7-2-6-5-4-3 |
| Valvetrain: | Overhead valve, two valves per cylinder, variable valve timing |
| Fuel Delivery: | Direct high-pressure fuel injection with Dynamic Fuel Management |
| Ignition System: | High-energy coil-on-plug |
| Horsepower (hp / kW @ rpm): |
420 / 313 @ 5600 rpm (SAE certified) |
| Torque (lb.-ft. / Nm @ rpm): | 460 / 621 @ 4100 rpm (SAE certified) |
| Manufacturing Location | Tonawanda, N.Y. |
